Introduction of MF01 Smart 4 Ports USB Hub
By Milfra | 29 September 2020 | 0 Comments

Introduction of MF01 Smart 4 Ports USB Hub


Features:
1) Voice control (compatible with Amazon Alexa, google home, Xiaodu speakers, Xiaomi, Tencent Cloud Xiaowei)
2) Mobile phone app control (timing/countdown function, sharing function, each USB port can be controlled on/off independently, and all USB ports can be closed or opened with one key. The name of the USB port on the app can be changed according to user needs, so that users can understand Remember the device name corresponding to each USB connection.)
3) USB sockets all adopt USB 3.0 data interface, high-speed data transmission, fast transmission.

Advantages: Compared with an ordinary USB hub, MF01 Smart 4 Ports USB Hub has the function of intelligent control, and remote control is no longer out of reach. Users can control the device according to your mood anytime, anywhere. Voice operation and direct voice control make life and work easier and more comfortable.

Application scenarios:
Mainly used for laptop computers, expand the USB ports on the computer, so as to connect more external devices (mouse, keyboard, U disk, mobile phone, desktop fan, desktop lamp, etc.)
High-speed file transfer can greatly and effectively solve the user's trouble of not being able to connect more than three external devices when using the computer. Essential small accessories for laptop computers that go out and work.

Appearance and performance:
1. Double-sided high matte acrylic sheet, non-slip protection machine, better hand feeling.
2. The aluminum alloy frame is adopted, which shows a low-key and luxurious design. More fashionable and modern. After oxidation treatment, heat dissipation is fast. Separate design of the data cable to use and store more flexible. The product is small and exquisite and does not take up space and is convenient to carry. Essentials for travel and office work.
3. This USB hub has 4 USB sockets, all of which are high-speed 3.0 USB data ports, supporting 5Gbps. Quickly transfer data and run at full load without stalling. The transmission speed is so fast that people raise their hands to praise.
4. Add an independent Micro USB power supply with a voltage of DC 5V±5%, which is used to charge the USB hub when the 4 USB ports are fully loaded and carry relatively high-power small appliances. Ensure the normal operation of each USB. Stable transmission
Let your device fully charge up quickly.
5. A WiFi chip is installed inside the USB Hub, and the powerful chip runs independently, which is why it can be remotely controlled in the mobile app. Through the command APP, 4 USB ports can be fully opened and closed with one key, and each USB port can be controlled separately.
6. The USB hub has a small button, which is used to control the USB on and off and is used as a pairing button when pairing the mobile APP. This button is essential when the product uses smart functions. And it is used to control the working status of all USB sockets. Small buttons, great effect!
7. There is a WiFi signal pattern beside the main switch button, and the WiFi signal is colored, we call it the WiFi indicator/WiFi signal light.
Before WiFi is paired, the color of the WiFi indicator after pairing is different from the blinking state. This is to help users better judge the use of the product and the pairing mode. The WiFi indicator is red when it is working and does not work. When it is blue.
If the product is connected to the computer when you want to pair the mobile app. Please follow the guidelines below to pair the product with the mobile app:
7 steps to equipment distribution network:

Step 1: Scan the QR code of the APP in the product user manual or search for "smart life" app in the mobile software store to install
Step 2: Register an account (you can register an account with your email or phone number)
Step 3: Open the main interface of the smart life app, click the "+" sign in the upper right corner of the page, and select the name of the WiFi device
Step 4: Press and hold the switch button for 7-10 seconds until the WiFi indicator flashes quickly (3 flashes per second), then you can pair with the mobile app.
PS: The factory default pairing mode of the product flashes quickly. If users want to try other pairing modes, they can follow the instructions in the manual.
Step 5: Enter the home WiFi password (the phone needs to be connected to the home WiFi first)
Step 6: Wait for the device to connect (It is recommended that the router, mobile phone, and the device as close as possible)
Step 7: After successfully configuring the network, you can control/timing/share each USB device through the app.

Product pairing method:
Quick flash mode EZ mode: WiFi signal light flashes 3-5 times per second
Slow flash mode AP mode: WiFi signal light flashes once in 3 seconds

The packaging accessories are as follows:
Product x1
Manual x1
USB data cable x1

 Problems encountered:
1. If the 4 UBB sockets are used to carry products with a relatively large wattage, the computer may not have enough power supply, and it will take a long time for the device to be fully charged.
Solution: Find a plug/adapter at this time and directly supply power to the USB hub to easily solve the problem

2. Failed to configure the network
solution:
Step 1: Please check whether the device is normally powered on
Step2: Whether the phone and the device are on the same WiFi network
Step3: If the network is normal but the device fails to configure the network, please confirm whether the router at home is overloaded, and you can try to turn off the WiFi function channel of a device and reconfigure it.
Step4: Please confirm whether the entered router password is correct, pay attention to whether there are spaces and capitalization issues before and after the WiFi account or password
Step5: Please check whether all connected WiFi is 2.4G network.

Leave a Reply

Your email address will not be published.Required fields are marked. *
Name
E-mail
Content
Verification code